Start with the installer’s instructions
Keep the product names and care sheet from your installation. Epoxy, polyaspartic and flake floors can use different layers and textures, so one cleaning routine will not fit every system.
Ask when you can walk, park, move storage and begin wet cleaning. A floor may allow light use before it reaches full cure. Follow the actual system’s schedule instead of using an advertised installation time as a cleaning deadline.
A simple cleaning routine
Remove loose grit first
Sweep or use suitable equipment to remove dirt before washing. Grit under tires and wheels can wear the surface. Pay attention to the entrance and the paths used by vehicles, bikes and rolling toolboxes.
Use an approved cleaner
Check the product care sheet for the recommended cleaner, dilution and cleaning equipment. A suitable neutral cleaner may be appropriate for routine dirt; oil and other spills can need different treatment. Do not mix cleaning chemicals or assume a household solvent is safe for the finish.
Remove residue and standing water
Follow the instructions for rinsing and removing cleaning solution. Keep the area clear while it dries. A textured or flake floor still needs care when wet; decorative texture is not a guarantee against slipping.
Spills and heavy items
Deal with ordinary spills promptly using a method approved for the coating. For fuel, solvents or an unknown substance, follow the substance’s safety instructions and seek product-specific cleaning advice. Do not spread it around with routine wash water.
Ask the installer about moving appliances, jacks, stands and heavy storage across the finished surface. Avoid dragging sharp edges. Confirm any restrictions for mats or coverings before leaving them in place.
When cleaning is not the answer
A dull patch, loose coating or recurring bubble may need assessment rather than a stronger cleaner. Note when the change appeared and whether there was a spill, impact or damp area. If the coating is lifting, avoid covering it with an unapproved patch product.
Our recoating and removal page explains the difference between refreshing a sound surface and replacing a failing finish. A moisture issue may need assessment beneath the coating.
Choosing a new floor? Ask about care now
Compare a finished sample’s texture and cleaning needs before selecting a flake blend. Discuss how the garage is used: parking, workshop work, storage or a combination. Ask which maintenance instructions and product details you will receive when the job is complete.
A useful quote covers the floor’s appearance and its everyday care. For the full project, see the cost and scope checklist.